Disclosure: As an Amazon Associate, ilcastellomenu.com earns from qualifying purchases. Prices and availability change; check Amazon for the latest.
Where to buy
Check the latest price, availability and delivery on Amazon. Orders are placed on Amazon.
- ELEGOO Saturn 4 Ultra — premium mid-size resin 3D printer — Check on Amazon
- ELEGOO Mars 5 Ultra — mid-range compact resin 3D printer — Check on Amazon
- Bambu Lab P1S — mid-range enclosed FDM 3D printer — Check on Amazon
- Bambu Lab A1 Combo — mid-range multi-colour FDM 3D printer — Check on Amazon
- Anycubic High-Speed 3D Printer (ACE 2 Pro ready) — mid-range high-speed FDM 3D printer — Check on Amazon
- Creality Ender 3 V3 SE — budget FDM 3D printer — Check on Amazon
Read the full guide ↓
Choosing the best 3d printers for warhammer 40k is really a decision about the work you want to produce — and this guide treats it that way from the first line. Warhammer 40K printing lives at the intersection of miniature detail and gaming reality: infantry with faction detail measured in millimetres, vehicles and terrain at table scale, and conversion parts that must match an existing army’s look. Resin is the army-builder’s engine — whole units per plate at detail that honours the sculpts — while FDM builds the battlefield around them and the occasional very large centrepiece. A necessary honesty: print your own designs, licensed files and legitimate conversion and terrain pieces; the game’s miniatures are protected designs, and this guide ranks printers, not permissions.
A note on how to use the rankings: the order reflects this lens’s priorities, not a universal league table. The machine ranked fourth here may be first for your neighbour’s version of the same hobby. The verdict line under each pick — who it suits and who it does not — is the fastest honest summary we can give you, and the comparison table puts the six side by side on the attributes that decide this work.
If your projects also stretch toward Best 3d Printers For Tabletop Minis, that shortlist is worth comparing before you decide.
In this guide
Quick Picks
| Badge | Pick | Why it stands out | Link |
|---|---|---|---|
| Best Overall | ELEGOO Saturn 4 Ultra | 12K resolution across a generous build plate prints whole batches of miniatures or several models at once | Check on Amazon |
| Best for Heroes and Characters | ELEGOO Mars 5 Ultra | 9K screen resolves miniature detail, small collectibles and fine surface texture beautifully | Check on Amazon |
| Best for Vehicles and Large Centrepieces | Bambu Lab P1S | Enclosed CoreXY design prints engineering filaments like ABS and ASA far more reliably than open-frame machines | Check on Amazon |
| Best for Colour-Coded Markers and Terrain | Bambu Lab A1 Combo | AMS lite multi-colour printing makes signs, models and gifts far more appealing with no manual filament swaps | Check on Amazon |
| Best for Fast Terrain Batches | Anycubic High-Speed 3D Printer (ACE 2 Pro ready) | High rated speed and a built-in camera suit users who start prints and monitor them away from the desk | Check on Amazon |
| Best Budget for Terrain | Creality Ender 3 V3 SE | Direct-drive extruder handles flexible TPU filament far better than Bowden-tube entry machines | Check on Amazon |
How These Picks Were Chosen
Finally, a discipline this guide keeps throughout: no invented specifications, no prices that will be stale by the time you read them, and no capability claims the hardware cannot back. Figures quoted for speed or size are the manufacturers’ own, labelled as such, and the advice is built to survive contact with your first month of ownership rather than to win an argument in a comment thread.
- Unit-batch throughput: 40K is an army hobby, and armies are counted in dozens of models
- Detail fidelity at 28–32 mm: faces, insignia and weapon detail that painting can honour
- Tough resin behaviour: game pieces are handled, transported and occasionally dropped on concrete
- Workspace fit: ventilation for resin, noise and footprint for FDM, and a stable surface for both
- Process fit first: resin for fine detail and smooth small parts, FDM for size, strength, colour and low-mess everyday use
- Build volume measured against your real projects, not the largest thing you can imagine printing once
The method behind the shortlist was consistent across this guide. First, the job was defined from the work itself — the parts, models or pieces this lens actually produces — and machines were scored against that job, not against generic specification sheets. Second, process fit was settled before brand preference: resin and FDM are different tools, and ranking them against each other without reference to the work produces nonsense. Third, every machine was checked for the ownership realities that specifications hide: consumables, spare parts, community knowledge and the failure modes owners actually meet.
Readers working through this cluster often also weigh Best 3d Printers For Teaching, where the same machines are ranked against a neighbouring brief.
The 6 Best 3D Printers For Warhammer 40K

ELEGOO Saturn 4 Ultra (Best Overall)
The Saturn 4 Ultra is the detail benchmark for this lens: a wide 12K plate means whole sets print in one cycle at a sharpness FDM cannot reach, which is why batch-minded detail hunters start here.
The Saturn 4 Ultra is built for people whose limiting factor stopped being detail and became throughput. The plate is wide enough to run a squad, a product batch or a full set of parts in one cycle, and the tilting release mechanism keeps cycle times short for a resin machine. Wi-Fi cluster printing means a second or third unit joins the same queue instead of becoming a separate chore, which is exactly how small resin businesses actually scale.
Strengths
- 12K resolution across a generous build plate prints whole batches of miniatures or several models at once
- Wi-Fi cluster printing and AI camera monitoring suit small production runs and print queues
- Resin detail is in a different league from FDM for faces, fine textures and sharp small parts
Trade-offs
- Resin workflow means gloves, washing, curing and ventilation are part of every single print
- Running costs include resin, FEP films, gloves and wash solution, not just the machine
- Not suitable around unsupervised children or in poorly ventilated living spaces
- Type: MSLA resin 3D printer, 12K mono LCD
- Build volume: 218.88 x 122.88 x 220 mm
- Rated speed: up to 150 mm/h (manufacturer figure)
- Features: AI camera, Wi-Fi cluster printing, automatic levelling
- Use: miniatures, detailed models and small-batch resin work
None of that removes the resin bargain: every print is washed, cured and handled with gloves, and the room needs ventilation you can feel. The AI camera and failure detection reduce wasted cycles, but they do not make resin a kitchen-table material. Buyers who set up a proper corner — extraction, a wash-and-cure station, sealed storage — get a detail factory. Buyers who skip the setup get a mess and a headache.
Saturn ownership is a workflow commitment that pays in output. The owners who thrive with it run a proper station: wash and cure beside the printer, resin strained and stored correctly, FEP films replaced on schedule rather than on failure, and plates laid out in the slicer the night before a production day. The cluster-printing capability means the second unit is a genuine scaling step, not a new learning curve, and the AI camera earns its keep on long plates where a mid-print failure is measured in hours and resin. If that station discipline sounds like a pleasure rather than a chore, this is your machine; the detail it returns for the discipline is unmatched in this guide.
Best for: batch-printing detailed models, figures and sets at 12K sharpness / Not suited for: large one-piece models and low-mess everyday printing

ELEGOO Mars 5 Ultra (Best for Heroes and Characters)
The Mars 5 Ultra is the purest expression of this lens: a small plate covered in very fine pixels, made for the prints where a face, a buckle or a line of tiny text decides whether the model convinces.
The Mars 5 Ultra is the detail specialist for people with limited space and unlimited standards. Its 9K screen puts very small pixels across a small plate, which is precisely the maths that makes 28 mm faces, jewellery-scale texture and crisp lettering possible. Automatic levelling and the tilting release design remove two of the classic beginner failure points, so the learning curve is about supports and exposure, not about fighting the machine.
Strengths
- 9K screen resolves miniature detail, small collectibles and fine surface texture beautifully
- Compact footprint fits a hobby desk or a ventilated utility corner where a big machine cannot
- Smart levelling and detection reduce the failed first prints that put beginners off resin
Trade-offs
- Small build plate means a few miniatures at a time, not full production batches
- Resin handling, washing and curing add post-processing time to every model
- Fumes and ventilation rule it out for bedrooms and classrooms without extraction
- Type: MSLA resin 3D printer, 9K mono LCD (7 in)
- Build volume: about 6.04 x 3.06 x 6.49 in
- Features: smart automatic levelling, intelligent detection, Wi-Fi transfer
- Use: tabletop miniatures and detailed small models
- Design: compact desktop resin printer
Its limits are honest ones: the plate is small, so batch ambitions belong to its bigger Saturn sibling, and the resin workflow still demands gloves, washing, curing and moving air. Within those boundaries it is a focused instrument. If your prints live at miniature scale and your workspace is a corner rather than a room, this is the shape of machine that fits both.
The Mars 5 Ultra rewards the focused owner. Its world is small and excellent: a ventilated corner, a wash-and-cure rhythm measured in minutes, and a library of profiles tuned per resin that turn exposure guesswork into routine. Because the plates are small, its economics favour precious prints — heroes, masters, gifts and sellable detail — over bulk, and owners who respect that focus get a machine that feels less like equipment and more like an instrument. Keep spare FEP films and a second vat if you print daily, strain resin back after any failure, and the little machine will out-produce printers three times its size in the only currency its owners count: finished detail.
Best for: single miniatures and small collectibles where detail is everything / Not suited for: batch production and large models

Bambu Lab P1S (Best for Vehicles and Large Centrepieces)
For this lens the P1S is the FDM counterweight: when a model is too large for a resin plate, needs colour-free strength, or will be handled hard, its enclosed speed and consistency produce clean parts that sand, prime and paint into display pieces.
The P1S earns its place in workshop after workshop because the enclosure changes what is possible, not just what is convenient. Warp-prone filaments that curl off an open bed stay flat when chamber heat is held steady, and the CoreXY motion system keeps quality consistent at speeds that would shake a basic bedslinger apart. For anyone printing the same part ten times, that consistency matters more than any headline speed figure: the tenth part comes out like the first, which is the whole point of a production-minded machine.
Strengths
- Enclosed CoreXY design prints engineering filaments like ABS and ASA far more reliably than open-frame machines
- Fast, well-tuned factory profiles make it a workhorse for repeat parts and small production batches
- MakerWorld ecosystem shortens the path from download to successful print, even for newer users
Trade-offs
- Enclosure fans and fast motion make it louder than open bedslingers in a quiet room
- The best experience lives inside Bambu’s ecosystem and slicer, which not everyone wants
- It is not a resin machine, so miniature-level fine detail has clear limits
- Type: enclosed CoreXY FDM 3D printer
- Build volume: 256 x 256 x 256 mm class
- Design: fully enclosed chamber
- Ecosystem: Bambu Studio slicer and MakerWorld model library
- Use: fast, repeatable FDM printing
Ownership is deliberately ecosystem-led. Bambu Studio profiles, automatic flow calibration and the MakerWorld library remove most of the trial and error that used to define this hobby, and spare parts and upgrades flow through one channel. The trade is openness: tinkerers who want to rewrite firmware and swap every component will feel fenced in, while users who simply want parts off the bed will feel looked after. Judge it by which of those two people you are.
Living with the P1S long-term is mostly a story of consumables and calm. Nozzles, build plates and filament are all standardised and easy to source through the maker’s channel, profiles update through the slicer, and the machine’s party trick — starting a print and trusting it — survives month twelve as well as week one. Owners stepping up from open-frame machines consistently report the same surprise: not the speed, but how rarely they think about the printer at all between starting a job and collecting a part. That invisibility is what a workhorse is supposed to feel like, and it is earned by the enclosure, the calibration routines and an ecosystem that treats maintenance as a scheduled event rather than a detective story.
Best for: larger display models and scenic pieces that need clean, consistent FDM output / Not suited for: miniature-scale faces and textures that only resin resolves

Bambu Lab A1 Combo (Best for Colour-Coded Markers and Terrain)
The A1 Combo serves this lens through colour: multi-material prints arrive with team colours, faction markings or labelled parts already in the plastic, which removes hours of masking and hand-painting from small-model workflows.
The A1 Combo is the machine that turned multi-colour printing from a project into a default. The AMS lite feeds up to four filaments and swaps them automatically, so a model that would once have meant pausing, unloading and reloading by hand simply prints while you do something else. Logos gain a second colour, game pieces gain teams, and gifts gain names, all without painting. For decorative and light functional work, that single feature reshapes what people actually make.
Strengths
- AMS lite multi-colour printing makes signs, models and gifts far more appealing with no manual filament swaps
- Automatic calibration and tangle detection make it one of the friendliest first printers to live with
- Quick-swap nozzle and active motor noise compensation keep it beginner-tolerant and relatively quiet
Trade-offs
- Open frame limits ABS and other warp-prone filaments without an enclosure workaround
- Multi-colour prints generate purge waste that adds up on colour-heavy models
- Bedslinger footprint swings front to back, so shelf depth matters more than width
- Type: FDM 3D printer with AMS lite multi-colour unit
- Feature: multi-colour printing out of the box
- Design: open-frame bedslinger with automatic calibration
- Ecosystem: Bambu Studio slicer and MakerWorld model library
- Use: beginners, colour models and everyday parts
Underneath the colour story sits a carefully automated printer: full automatic calibration, filament tangle detection and a quick-swap nozzle remove the chores that used to filter out beginners. It is an open-frame machine, so it is happiest with PLA and PETG in a normal room, and it will not pretend otherwise. Buyers who accept that boundary get one of the lowest-friction printing experiences available at any tier.
Long-term A1 ownership revolves around the AMS lite and the habits it creates. Spools live on the unit ready to print, colour changes stop being events, and the purge waste becomes a line item you manage by orienting models and grouping colour changes intelligently — the slicer shows you the cost of every colour decision before you commit. Mechanically the machine asks little: keep the rails clean, respect the quick-swap nozzle’s simplicity, and let the automatic routines do what they were built to do. For households and small studios, the A1’s real achievement is social: it is the printer other people in the building will actually use, correctly, without you standing behind them.
Best for: colour models, team pieces and display items printed in the plastic / Not suited for: engineering filaments and resin-level fine detail

Anycubic High-Speed 3D Printer (ACE 2 Pro ready) (Best for Fast Terrain Batches)
Anycubic’s machine is the volume-and-pace option here: big bases, terrain and multi-part models move quickly, and the camera lets long scenic pieces run while you paint the last batch instead of watching this one.
Anycubic built this machine around pace. The headline figure is a maximum, and real prints run below it, but the motion system, flow rate and tuning are all aimed at finishing ordinary jobs quickly rather than eventually. The built-in camera is the other half of that promise: start a long print, leave, and check in from your phone instead of hovering. For sellers and busy households, that combination of speed and supervision is the actual product.
Strengths
- High rated speed and a built-in camera suit users who start prints and monitor them away from the desk
- Multi-colour path via the ACE 2 Pro unit covers signs, gifts and product prototypes in several colours
- Generous build volume handles larger models in fewer sections than compact machines
Trade-offs
- Multi-colour needs the additional ACE unit, which is a second purchase to budget for
- Open-frame design is not the tool for ABS or nylon without an added enclosure
- Speed figures are maxima; quality settings run slower in practice, as on every printer
- Type: FDM 3D printer, multi-colour with additional ACE 2 Pro unit
- Rated speed: up to 600 mm/s (manufacturer figure)
- Build volume: 255 x 255 x 260 mm
- Feature: built-in camera for remote monitoring
- Use: fast everyday and multi-colour printing
The ACE 2 Pro path matters when you plan for it. Bought later, the multi-colour unit turns this into a colour machine for signs, branded items and prototypes; bought never, it remains a fast single-colour printer, which is a perfectly respectable outcome. What it is not is an engineering-filament machine: the open frame keeps it in PLA, PETG and TPU territory, and honest buyers will plan their materials around that.
Owning the Anycubic is an exercise in using speed wisely. The machine rewards owners who build a small library of proven profiles — one for fast drafts, one for quality, one per regular material — and then stop tuning. The camera changes behaviour more than any specification: prints get started earlier in the day, checked from elsewhere, and cancelled in time when they fail, which quietly raises the machine’s real output far beyond its rated pace. Budget for the ACE unit only when your project list proves colour is a pattern rather than a wish, and the machine’s economics stay honest. Treated that way, it is a throughput tool that happens to sit on a desk.
Best for: terrain, bases and multi-part models printed quickly in batches / Not suited for: the finest miniature detail, which belongs to resin

Creality Ender 3 V3 SE (Best Budget for Terrain)
The Ender 3 V3 SE is the accessible route into this lens: terrain, bases and larger scenic pieces print affordably, and its direct drive keeps even budget filament behaving while skills develop.
The Ender 3 V3 SE is the value anchor of this guide, and its case rests on the direct-drive extruder. Flexible filaments, stringy budget PETG and everyday PLA all feed more reliably through a Sprite direct drive than through the long Bowden tubes of older budget machines, and the CR Touch probe ends the paper-shim levelling ritual. Schools and libraries buy it in multiples for a reason: when one breaks, the fix is documented, cheap and quick.
Strengths
- Direct-drive extruder handles flexible TPU filament far better than Bowden-tube entry machines
- Auto levelling and quick assembly make it a realistic first printer for schools and libraries
- Huge community knowledge base means every problem you will ever meet has a documented fix
Trade-offs
- Open frame rules out serious ABS or nylon work without an added enclosure
- Entry-tier parts and fans are louder and less refined than premium machines
- Occasional manual tuning is still part of the Ender ownership experience
- Type: FDM 3D printer, Sprite direct-drive extruder
- Rated speed: up to 250 mm/s (manufacturer figure)
- Features: CR Touch auto levelling, dual Z-axis, auto filament loading
- Use: beginners, schools, libraries and everyday parts
- Assembly: largely pre-assembled, quick setup
Set expectations at the tier. Fans are audible, the frame is open, and a little hands-on tuning remains part of ownership — which many owners honestly enjoy, because the Ender line teaches how printers work while it prints. If your budget is fixed and your parts are PLA, PETG or TPU, the money saved against premium machines buys a great deal of filament, and filament is what practice is made of.
Ender ownership is a relationship with a machine you are allowed to understand. Every part is replaceable, every adjustment is documented by a community that has made your exact mistake before, and the printer improves as you do — better profiles, smarter upgrades, calmer troubleshooting. The V3 SE’s modernisations mean the learning is now about printing rather than about levelling, which is the right curriculum. Owners should expect to spend occasional evenings maintaining rather than printing, and many discover they enjoy those evenings: this is the machine that teaches the hobby while practising it. For schools and fleets, that teachability, multiplied by a price that allows spares of everything, is the entire argument.
Best for: budget terrain, bases and larger scenic models / Not suited for: resin-grade miniature detail
Comparison Table
| Pick | Type | Build area | Standout trait | Price |
|---|---|---|---|---|
| ELEGOO Saturn 4 Ultra | Resin MSLA, 12K | 218.88 x 122.88 x 220 mm | Batch detail with Wi-Fi cluster printing | Check price on Amazon |
| ELEGOO Mars 5 Ultra | Resin MSLA, 9K | About 6.04 x 3.06 x 6.49 in | Compact fine detail with smart levelling | Check price on Amazon |
| Bambu Lab P1S | Enclosed FDM (CoreXY) | 256 x 256 x 256 mm class | Consistent speed with engineering filaments | Check price on Amazon |
| Bambu Lab A1 Combo | Open FDM, multi-colour | Standard bedslinger class | Automatic multi-colour printing with AMS lite | Check price on Amazon |
| Anycubic High-Speed 3D Printer (ACE 2 Pro ready) | Open FDM, high-speed | 255 x 255 x 260 mm | Fast printing with built-in camera monitoring | Check price on Amazon |
| Creality Ender 3 V3 SE | Open FDM, direct drive | Standard bedslinger class | Budget direct-drive with auto levelling | Check price on Amazon |
On the wider printer desk, Best Printers For Linux covers a different but complementary set of decisions.
How to Choose the Right 3D Printer for Warhammer 40K
Build the army as a production run
Standardise on a tough resin blend, one exposure profile and plate layouts per unit type. Print infantry in batches while FDM terrain dries, keep a painting queue moving, and a playable force emerges in weeks rather than the traditional years.
Terrain is half the table’s look
FDM terrain — ruins, industrial structures, scatter — printed in PLA and painted boldly transforms games more cheaply than any other upgrade. The same fleet that prints your army’s vehicles prints its world.
Materials and workflow for detail work
Detail printing runs on a short materials list handled well: quality standard or tough-blend resins in grey for FDM-comparable reading of surfaces, fine nozzles and small layer heights on the FDM side, and a finishing kit — files, abrasives, filler primer — that treats the print as the start of the object. Workflow matters as much as material: orient for the show face, support the hidden one, wash and cure with restraint, and inspect under primer before paint. Makers who standardise these steps stop having good and bad days; they have a process, and the process has a quality level.
Budget for the second month, not just the first
The printer is the down payment. Filament or resin, replacement FEP films and nozzles, washing solution, gloves, tools, a wash-and-cure station for resin, and the storage to keep materials dry all arrive within weeks. A sensible plan reserves a real share of the budget for consumables and workspace, because a premium machine starved of materials produces less than a modest machine that is always fed.
Resin or filament: the first and biggest decision
Resin (MSLA) printers cure liquid resin layer by layer with light, producing very fine detail and smooth surfaces on small parts, at the cost of gloves, washing, curing and ventilation. FDM printers melt plastic filament, producing larger, tougher, cheaper parts with visible layer lines. Most makers who stay in the hobby end up valuing both; the right first choice is the process that matches the projects you listed before you started shopping, not the one with the most impressive sample photo.
Build volume is a project measurement
Measure the largest part you realistically print in one piece, then buy the plate or bed that fits it with margin for supports and brims. Oversizing has real costs: bigger machines cost more, heat slower and occupy workspace forever. Undersizing has a different cost — splitting models, gluing sections and hiding seams — which is sometimes a fair trade and sometimes a weekly frustration. Your project list, written down, settles this in five minutes.
The enclosure question
An enclosed chamber holds heat around the print, which is what warp-prone engineering filaments such as ABS and ASA need to stay flat and strong. It also keeps dust off, noise in and curious fingers away from hot parts. For PLA and PETG in a normal room, an open frame prints beautifully and costs less. Decide by material: if your project list says engineering plastic, enclosure moves from luxury to requirement.
Calibration prints earn their keep
A temperature tower, a flow test and a small tolerance gauge take an evening and pay rent for a year. They convert arguments about settings into measurements, and they give every new spool of material a known starting point instead of a guess. Keep the printed results labelled with the material and date; a shelf of tiny labelled tests is the most useful reference library a maker owns.
Safety is part of the setup, not an accessory
Resin is handled with gloves and eye protection, waste is cured before disposal, and ventilation runs while printers and wash stations are open. Hot ends and heated beds are respected, machines are not left running in spaces where a fault would go unnoticed for hours, and children meet printing as a supervised activity. None of this is complicated; all of it is easier to build as habit on day one than as repair later.
Keeping a print log
A line per job — date, model, material, profile, orientation, result — sounds like administration and behaves like compound interest. Patterns emerge: which spool misbehaves, which orientation scars, which profile your machine loves. When a failure repeats, the log turns suspicion into evidence. Makers who log improve measurably faster than makers who rely on memory, because memory edits and logs do not.
Knowing when to reprint instead of repair
Some failures are worth rescuing with filler, glue and patience; most are cheaper to reprint with the lesson applied. The honest calculation includes your time, the material already spent, and the quality bar the part must meet. Professionals reprint early and often, because the second attempt with a corrected preview is usually the fastest route to a part that was actually worth making.
Buying second-hand: what to check
A used printer can be excellent value, and its risks are inspectable: ask for a recent test print, check the screen or bed for damage, confirm spare parts still exist for the model, and price in a service kit of wear parts from day one. Machines from active makers who upgraded are usually safer than machines from abandoned hobbies, because a printer that has been printing is a printer that works. Whatever the source, run your full calibration routine before judging output quality — many ‘faulty’ used printers are simply uncalibrated ones, which is precisely the discount you are being paid to fix.
Printers as a shared household resource
A printer that only one person may touch is a printer that mostly idles. Households get value when everyone can start a simple job: a shared folder of proven files, standard materials loaded and labelled, and a house rule that experiments happen with the owner’s blessing. The same logic scales to clubs and workplaces, where a small induction and a visible booking habit turn one machine into shared infrastructure rather than a guarded shrine.
When to upgrade, and when to stay
Upgrade when a measured limitation blocks real projects repeatedly: the plate that is always too small, the material the frame cannot run, the queue that never clears. Stay when the limitation is theoretical, because the familiar machine with proven profiles out-produces the new machine’s learning curve for months. The discipline is a simple log — every time the current printer genuinely stops a project, write it down; when a page fills with the same complaint, the upgrade has made its own case.
The sample-print habit
Before committing to any long or important print, run the smallest version that tests the risky feature: the fit, the overhang, the fine detail, the joint. Sample prints cost minutes and grams; failed full prints cost evenings and spools. Experienced makers treat samples the way carpenters treat test cuts — not as caution, but as the mechanism by which the real work succeeds the first time.
Reading a slicer preview like a professional
Scroll the preview layer by layer and ask three questions of every region: what holds this up, what cools this down, and what happens when the nozzle or screen reaches the widest point. Floating islands, unsupported overhang tips and sudden cross-section jumps are all visible before a gram of material is spent. Professionals are not faster tuners than beginners; they are earlier readers, and the preview is where that earliness lives.
Orientation is a design decision
The same model printed flat, tilted or upright differs in strength, surface quality, support scars and time. Layer lines are the grain of a printed part: loads should cross them, not peel them, and show faces should face up or away from supports. Spending two minutes rotating a model in the slicer routinely saves twenty minutes of sanding, or an entire reprint, and it costs nothing but attention.
Supports are a material, not a failure
Well-designed supports are cheap insurance with a known removal cost; badly designed ones are either absent where needed or welded where they touch. Learn your slicer’s support painting and blocking tools, place contact points on hidden faces, and treat support strategy as part of the design rather than an apology for it. The best finishers in any hobby are the ones whose supports were planned, not endured.
Dry material is a quality feature
Filament absorbs moisture from room air, and wet filament prints with bubbles, strings and weak layers that masquerade as machine problems. Sealed boxes with desiccant, a simple dryer, and the discipline to re-dry a spool that has sat out for weeks will improve output more reliably than most upgrades. Resin has its own version: shake it, keep it sealed, respect its temperature range, and strain it back into the bottle through a filter after failures.
For a related angle on choosing equipment, see Best 3d Printers For Technicians.
How Do You Set Up and Print for Warhammer 40K?
Good printing is a repeatable routine, not a talent. The sequence below is the one experienced owners follow for this kind of work; adapt the details to your material, but keep the order — preparation before printing, inspection before post-processing, maintenance before the next job.
- Choose and prepare the workspace. Put FDM printers on a stable, level surface away from drafts; put resin printers in a ventilated space with gloves, paper towels and a sealed waste container within reach before the bottle opens.
- Level and calibrate once, properly. Run the machine’s automatic levelling and calibration routines on day one and after any move or nozzle change. Ten calm minutes here prevent the majority of first-layer failures that beginners blame on the printer.
- Slice with the preview open. Load the model, choose the material profile, add supports only where the preview shows overhangs that need them, and read the layer preview start to finish. The preview is the print; everything after is execution.
- Start with the first layers watched. Watch the first layers complete before walking away. Adhesion, flow and support contact all declare themselves early, and a print cancelled at layer five costs minutes instead of hours.
- Finish one workflow before optimising another. New owners often tune printing, finishing and painting simultaneously and learn none of them. Run one complete project through the whole pipeline, note where it hurt, and improve that stage next time. Sequential learning compounds; parallel tinkering just multiplies variables.
- Keep materials ready, not just bought. Store filament sealed and dry and resin sealed, shaken and within its working temperature range. Most ‘machine problems’ at this level are material-condition problems wearing a disguise, and a tidy material shelf is the cheapest reliability upgrade in this entire guide.
- Remove and post-process with the right tools. Let FDM parts cool before prying; wash and cure resin parts fully before handling them bare-handed, and cure waste resin scraps before disposal so nothing liquid reaches a drain.
- Log what worked. Note material, profile, orientation and result for each job in a simple notebook or file. Three months of logs teach more than a year of guessing, and they make repeat jobs boring in the best way.
Troubleshooting quick list
- Problem: fine insignia and trim fill with resin → exposure is high for the detail level; calibrate with a fine-feature test and reduce in small steps.
- Problem: swords, aerials and banner poles snap → print those elements in flexible-blend resin or replace with wire and plastic rod, a time-honoured modelling solution.
- Problem: printed vehicle panels warp → print large flat panels on FDM where size allows, or support resin panels fully and cure them flat under restraint.
- Problem: layer lines shifting mid-print → check belt tension, secure the machine’s surface, and reduce acceleration before assuming a hardware fault.
- Problem: brittle or weak parts → suspect wet filament or under-cured resin first; dry or fully cure a test piece before redesigning the model.
And if your workspace planning extends beyond this purchase, Best Small Printers For Laptops is a useful companion read.
Common Mistakes
- Printing an army at display brittleness. Gaming armies are handled by opponents, children and gravity. Tough blends and slightly reinforced fragile points are not compromises; they are the correct specification for pieces with a table life.
- Ignoring scale consistency across sources. Files from different sculptors vary in proportion even at the same nominal scale. Test-print one model from each source and compare against your army before batch production.
- Treating print files as the whole hobby. Basing, painting and storage decide how the army reads on the table. Budget the full pipeline — the printer feeds it, it does not replace it.
- Ignoring the workspace until the printer arrives. Resin without ventilation and FDM without a stable surface both fail socially before they fail technically. Prepare the corner first — extraction, storage, lighting and a worktop you can clean — and the machine arrives into a system that works.
- Chasing settings before learning the preview. Most failed prints were visibly doomed in the slicer preview: floating parts, missing supports, impossible overhangs. Learn to read layers before learning to tune temperatures, and your success rate jumps in a week.
Final Recommendation
Start with the badge that matches your work. The headline recommendation for best 3d printers for warhammer 40k is the ELEGOO Saturn 4 Ultra (Best Overall): The Saturn 4 Ultra is the detail benchmark for this lens: a wide 12K plate means whole sets print in one cycle at a sharpness FDM cannot reach, which is why batch-minded detail hunters start here.
Choose the ELEGOO Mars 5 Ultra if your priority is best for heroes and characters; the Bambu Lab P1S if your priority is best for vehicles and large centrepieces; the Bambu Lab A1 Combo if your priority is best for colour-coded markers and terrain; the Anycubic High-Speed 3D Printer (ACE 2 Pro ready) if your priority is best for fast terrain batches; the Creality Ender 3 V3 SE if your priority is best budget for terrain. Every machine on this list earns its place for this lens; the wrong choice is only the one bought against a project list it was never going to serve.
Finally, Best Printers For Black And White Photos rounds out the picture for the room this printer will live in.
Frequently Asked Questions
What printer do most 40K hobbyists print with?
A mid-size resin machine — the Saturn class here — for infantry batches and detail, increasingly paired with an FDM machine for terrain and vehicles. The Mars class serves smaller collections and hero models beautifully.
How long does printing an army take?
Infantry units print in single-digit hours per plate; a full army is a campaign of weeks of printing interleaved with painting. Batch discipline and standard profiles are what separate finished armies from resin-grey intentions.
Can printed models be used in official events?
Policies vary by event and venue, and protected designs carry legal limits regardless. Many casual and club settings welcome printed terrain, conversions and original designs; check each event’s rules, and respect the game’s creators.
Where should a 3D printer live in the home?
FDM printers suit any room with a stable surface, though noise argues against bedrooms for overnight prints. Resin printers need ventilation and a surface you can protect and clean, which points to a utility room, garage or workshop corner with extraction — never an unventilated sleeping space.
When is it worth owning two different printers?
When your projects genuinely split across the resin/FDM divide — fine detail in one queue, large or functional parts in the other — a second machine stops being a luxury and becomes the schedule. Many makers arrive there within a year; buying both on day one, before the project list exists, is the version of that decision to avoid.



